Dantherm CDT 40S MKIII 43.5L Condensation Dehumidifier £1762.00 Detailed Description
The Dantherm CDT 40S can remove up to 43.5 litres of water within 24 hours. It contains an efficient high-pressure fan to quickly draw in large volumes of humid air through the vent.
Containing the new and eco-friendly R454C refrigerant that meets 2020 EU regulations, Dantherm mobile CDT dehumidifiers offer quick and easy control for both damage service companies and the building industry. The CDT dehumidifiers are renowned for their user-friendliness, superior digital control and light yet robust design.
This refrigerant dehumidifier that uses the natural process of condensation to remove moisture from the air, walls and floors within a room. The internal fan draws humid air into the front of the dehumidifier and puts it through an evaporator coil.
The air passes through a refrigerated evaporator inside the dehumidifier. The evaporator is kept cold and cools the air down to below its dew point temperature.
The moisture in the air then condensates and drops into the internal 14 litre water collection tank. The dry air is then passed through a hot condenser before it is expelled back into the room.
Features & Benefits
- Electronic control display
- Water container with handles
- Automatic stop when water container is full or removed
- High capacity
- Low energy consumption
- F-gas regulation 2020 compliant refrigerant
- Strong and robust cabinet of powder-coated hot
- Galvanized steel
- Epoxy-coated evaporator with active defrosting and condenser
- Adjustable handle
- Plastic bumpers
- Low weight
- Stackable
- Big wheels
- Can be integrated with Remote Monitoring Solution from Dantherm Group
Capacity (30°C/80% RH) | l/24h | 43.5 |
Capacity (20°C/60% RH) | l/24h | 18.6 |
Air flow | m3/h | 560 |
Operating temperature range | oC | 3-35 |
Operating humidity range | % RH | 40-100 |
Max. power consumption | W | 1,900 with heating element/900 without |
Refrigerant | R454c | |
Water tank | l | 14 |
Protection class | IPX4 | |
Height with handle down | mm | 823 |
Please contact us if you require further information or advice.
Technical Specification
What's In The Box
Related products
In stockThe ACT 7 mobile water-cooled air-conditioner can deliver efficient cooling in a matter of minutes with no cooling knowledge or special training required to install the unit. When in need of temporary small-scale cooling, an efficient and easily implemented solution is required.
In stockAccessory for ACT 7 Outdoor heat rejection unit.
In stockDantherm mobile CDT Condensation dehumidifiers offer quick and easy control for water damage restoration companies and the construction industry.
In stockThe Dantherm CDT 30S refrigerant dehumidifier is designed for professional use in the building or damage restoration sectors. It has a high pressure fan and two x Ø100 mm air ducts that allow you to connect flexible ducting to the dehumidifier (max length 5m)
In stockThe CDT 40 is a robust, cost-effective and energy-efficient, reliable mobile dehumidifier. It works in accordance with the condensation principle. CDT 40 is Fitted with a 1kW heating element, a high pressure fan, two duct spigots, allowing connection of two, flexible air ducts Ø100, each up to 5m long.
In stockThe Dantherm CDT 40S refrigerant dehumidifier is designed for professional use in the building or damage restoration sectors. It has a high pressure fan and two x Ø100 mm air ducts that allow you to connect flexible ducting to the dehumidifier (max length 5m). Cost-effective, energy-efficient and user-friendly dehumidifiers for water damage restoration and drying of buildings.
In stockThe Dantherm CDT 60 dehumidifier is ideal for water damage restoration, drying buildings, protecting from steam condensation and more. It uses the natural process of condensation to remove excess moisture from the air and the surface areas of walls and floors.
